Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Industrial Safety

Chemical Safety Board says multiple errors led to fatal accident

Two workers died in 2013 Williams Olefin chemical plant explosion

by Jeff Johnson
October 24, 2016

[+]Enlarge
Credit: CSB
The U.S. Chemical Safety Board says operators of the Williams Olefins plant wrongly assumed that backup equipment was clean and ready to use before the June 2013 accident.
Photo shows workers wearing hard hats running away from a fireball explosion at Williams Olefins in Geismer, Louisana, on June 13, 2013.
Credit: CSB
The U.S. Chemical Safety Board says operators of the Williams Olefins plant wrongly assumed that backup equipment was clean and ready to use before the June 2013 accident.

Errors in process management and equipment led to a 2013 fatal explosion at the Williams Olefins Plant in Geismar, La., an investigation by the U.S. Chemical Safety Board concludes.

Two workers died, and 167 other workers reported injuries after hydrocarbons leaked from a plant operation, formed a vapor cloud, and ignited.

The facility produces ethylene and propylene that are used by the petrochemical industry, said CSB Chair Vanessa Allen Sutherland, who unveiled the board’s conclusions last week in Louisiana.

A “reboiler”—a heat exchanger that supplies heat to a distillation column—catastrophically ruptured and caused the accident, CSB says in its report on the incident. The reboiler that failed was one of two in the system that provided heat to the propylene fractionator—a distillation column that separates propylene and propane.

The second reboiler was a backup and had been offline for 16 months. Plant officials assumed the backup reboiler was clean and available for use. When the operating reboiler appeared to have fouled, plant operators began to shift operations to the idle reboiler.

The plant operators did not know that the standby reboiler contained hydrocarbons and its pressure relief system was not in proper order, CSB found.

As the reboiler’s heat increased, the confined liquid hydrocarbons expanded, resulting in a quick and dramatic pressure rise within the vessel. The shell ruptured, causing a release, an expanding vapor explosion, and a fire.

A series of process safety management program deficiencies over the 12 years before the accident allowed the reboiler to be unprotected from overpressure problems, according to CSB.

After the incident, Williams Olefins redesigned the reboilers, improved its management of change process to be more collaborative, and updated its process hazard analysis procedures, CSB says. Further improvements are needed, the agency adds.

CSB took three years to complete its report of the investigation. According to CSB investigator Lauren Grim, the time was needed to conduct metallurgical analysis, run computerized accident scenarios, and gather input from accident experts and others.

Advertisement

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.