Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Materials

Lithium-sulfur batteries benefit from MoS2 encapsulation

Coating sulfur particles with thin flakes of the dichalcogenide provides physical and chemical protection, leading to durable batteries

by Mitch Jacoby
July 17, 2017 | A version of this story appeared in Volume 95, Issue 29

This schematic depicts a process through which sulfur is coated with sheets of MoS2 then reacted with lithium.
Credit: J. Am. Chem. Soc.
Wrapping sulfur spheres in thin MoS2 flakes protects the material and enables repeated lithiation reactions in batteries.

A simple procedure for wrapping sulfur particles in thin sheets of molybdenum disulfide may offer a way to capitalize on the promise of high-performance lithium-sulfur batteries, according to a study (J. Am. Chem. Soc. 2017, DOI: 10.1021/jacs.7b05371). Lithium batteries made with sulfur, a low-cost and abundant element, have the potential to store five times as much energy by weight as conventional Li-ion batteries. But long-lasting Li-S batteries have remained elusive because of several materials and chemistry problems. For example, electrochemical reactions in these batteries form troublesome lithium polysulfides, which dissolve in the electrolyte solution, reducing the availability of energy-rich lithium. In addition, lithiation reactions lead to substantial swelling of the cathode, which can trigger cracking and failure of that electrode. In an attempt to bypass those problems, Wei Tang and Kian Ping Loh of National University of Singapore and coworkers reacted a polyvinylpyrrolidone suspension of hollow sulfur particles with ultrathin MoS2 flakes, causing the flakes to tightly encapsulate the sulfur particles. The team made batteries fitted with cathodes prepared from the MoS2-S hybrid material and found that they retained much of their high initial charge capacity even after 1,000 charging cycles. The researchers attribute the good performance to strong van der Waals forces between the MoS2 layers, which help prevent escape of lithium polysulfides. They also found that wrinkles in the MoS2 wrap provide ample space to accommodate swelling of the sulfur particles upon lithiation.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.