Waste Gases Power Chemical Start-Ups | June 2, 2014 Issue - Vol. 92 Issue 22 | Chemical & Engineering News
Volume 92 Issue 22 | p. 5 | News of The Week
Issue Date: June 2, 2014 | Web Date: May 30, 2014

Waste Gases Power Chemical Start-Ups

Feedstocks: Firms that promise polymers and other materials from emissions gain traction
Department: Business
News Channels: Environmental SCENE
Keywords: biobased plastic, waste gases, greenhouse gases, renewable chemicals

Three start-ups seeking to capture the value of carbon in waste gases have received fresh backing from investors and consumer goods companies. The firms say their technologies can produce chemicals and plastics cost-competitively using greenhouse gases that otherwise would be emitted into the atmosphere.

A Liquid Light employee assembles an electrocatalytic cell that makes ethylene glycol from CO2.
Credit: Liquid Light
A Liquid Light worker assembles an electrochemical cell. The cell produces ethylene glycol from waste gas CO2 and added hydrogen
A Liquid Light employee assembles an electrocatalytic cell that makes ethylene glycol from CO2.
Credit: Liquid Light

Austin, Texas-based Skyonic has raised $12.5 million from investors ConocoPhillips and Enbridge to further develop its technology to convert CO2 emissions into chemicals such as hydrochloric acid and calcium carbonate. Last year, the company raised $128 million from investors. Skyonic operates a demonstration facility at a cement plant in San Antonio and is also building a commercial-scale plant there.

In April, Skyonic received a $500,000 grant from the nonprofit Climate Change & Emissions Management Corp. CCEMC, which is supported by the province of Alberta, provides funds to reduce greenhouse gas emissions through new technology.

Liquid Light, a start-up developing a CO2-to-ethylene glycol process, also recently won a $500,000 CCEMC grant. The New Jersey-based firm says its low-energy electrochemical cell uses commonly available catalysts to make chemical intermediates from waste gas. The company plans to build a 1-ton-per-day pilot plant in Canada with a major chemical partner.

And Newlight Technologies, which uses a biocatalyst to make polymers from waste methane and CO2, has already found customers for its polyhydroxyalkanoate. Dell will use the polymer to manufacture sleeves for its Latitude notebook computers beginning this fall. According to Dell, the packaging is both greener and less costly than traditional oil-based plastics.

Although most renewable chemicals on the market today are made from sugar, making products from waste is a key goal for companies in the sector, says Julia Allen, an analyst at Lux Research. “Using a lower- or no-cost feedstock could potentially have a huge impact on the economics of a process.” But the firms still have a long way to go to prove their technologies. “Waste gas streams can vary in composition from day to day and from plant to plant,” Allen says.

Chemical & Engineering News
ISSN 0009-2347
Copyright © American Chemical Society
brian sefton (June 3, 2014 12:47 PM)
You missed oakbio inc, a Sunnyvale California company which also received a CCEMC grant, makes PHAs and n-Butanol from industrial flue gas. Oakbio has been runninga co-located facility at a major CO2 producer for several years and has a patent pending CO2 to chemicals expression platform capable of producing thousands of chemicals. www.oakbio.com. Oakbio is funded by principals and grants and has taken no venture money to date. www.oakbio.com
Paul (August 19, 2014 3:44 PM)
You need a lot of carbon, hydrogen, oxygen, sulfur and other stuff to make plastics. Making a solid from a gas requires a lot of energy.

I really wonder of these companies aren't just ways to launder money for money big corporations.

Leave A Comment

*Required to comment