ADVERTISEMENT
2 /3 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Materials

Silicon-Based Ink Looks Good On Paper

Electronic Materials: New laser-assisted method could boost performance of printed semiconductors

by Matt Davenport
April 27, 2015 | APPEARED IN VOLUME 93, ISSUE 17

[+]Enlarge
Credit: Appl. Phys. Lett.
Researchers used a liquid ink and laser light to print thin films of silicon on paper.
09317-scicon-siliconcxd.jpg
Credit: Appl. Phys. Lett.
Researchers used a liquid ink and laser light to print thin films of silicon on paper.

Semiconducting inks are helping researchers print electronic devices on a growing range of low-cost substrates, including paper and plastic. Most of these inks rely on organic or metal oxide materials whose electronic properties are lacking in comparison with the grand pooh-bah of semiconductors—silicon. Scientists have previously developed silicon inks based on cyclopentasilane rings that can be converted to polysilane chains with ultraviolet light. Researchers can then bake those chains to form amorphous silicon at temperatures upward of 350 °C, but those temperatures can damage many inexpensive substrates. A team working at the Japan Advanced Institute of Science & Technology and Delft University of Technology, in the Netherlands, has now transformed cyclopentasilane inks into polycrystalline silicon at lower temperatures by using lasers (Appl. Phys. Lett. 2015, DOI: 10.1063/1.4916998). The team spread its ink on paper, irradiated it with UV light, and then hit it with pulsed laser light. The 28-nanosecond laser pulse contains enough energy to drive silicon crystallization but is brief enough to avoid damaging the paper. Although the team has not yet printed functional devices, the researchers believe the process could help create flexible, inexpensive sensors and radio-frequency communicators.

X

Article:

This article has been sent to the following recipient:

Leave A Comment

*Required to comment