Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Materials

Growing The Thinnest Of Semiconductors

Electronic Materials: Metal-organic chemical vapor deposition technique creates transition-metal dichalcogenides just three atoms thick over an area of square centimeters

by Bethany Halford
May 4, 2015 | A version of this story appeared in Volume 93, Issue 18

For supermodels and semiconductors, it seems that thin is always in. As electronics makers continue to squeeze more components into increasingly smaller spaces, they’re on the lookout for materials that can achieve the ultimate in small—atomic-scale electronic devices. Now, Jiwoong Park and colleagues at Cornell University report an advance toward realizing such materials. They’ve grown sheets of the transition-metal dichalcogenides MoS2 and WS2 that are only three atoms thick, but stretch over an area of about 10 sq in (Nature 2015, DOI: 10.1038/nature14417). Park’s team made the monolayer sheets via a new metal-organic chemical vapor deposition process, using Mo(CO)6 or W(CO)6 as the transition-metal source and diethylsulfide as the sulfur source. They added hydrogen gas to remove any built-up carbonaceous deposits. The resulting films were of sufficient quality to make field-effect transistors. The method does have some limitations: It takes about 26 hours and requires temperatures of 550 °C. Even so, Park and coworkers note that the technique is “a step toward the realization of atomically thin integrated circuitry” and could find use in the fabrication of flexible electronics, photovoltaics, and displays.

[+]Enlarge
Credit: Nature
MoS2 and WS2 can now be grown as atomically thin films with a measured area of 10 sq in.
A schematic of a monolayer of MoS2 or WS2. Metals are blue and S is yellow.
Credit: Nature
MoS2 and WS2 can now be grown as atomically thin films with a measured area of 10 sq in.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.