Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Environment

Patent Picks: Catalytic Converters

A look at recent patenting activity in catalytic converters, brought to you by C&EN and CAS

by Mitch André Garcia
June 29, 2015 | A version of this story appeared in Volume 93, Issue 26

 

A schematic of the surface chemistry of an automotive catalytic converter.
In the three-way catalyst, rhodium (Rh) preferentially absorbs NOx while platinum (Pt) and palladium (Pd) split oxygen. The metals then catalyze reactions with carbon monoxide and volatile hydrocarbons to produce nitrogen, carbon dioxide, and water.

Top


Neodymium Oxide Improves Catalytic Efficiency

[+]Enlarge
Credit: Wikipedia
Cutaway of a catalytic converter reveals the inner honeycomb structures that support the three-way catalyst.
Photograph of a cutaway section of a catalytic converter.
Credit: Wikipedia
Cutaway of a catalytic converter reveals the inner honeycomb structures that support the three-way catalyst.

Catalytic converters, found in all U.S. automobiles made since 1975, help clean engine exhaust by breaking down gaseous molecules that produce smog. These marvels of heterogeneous catalytic chemistry oxidize volatile hydrocarbons and carbon monoxide and reduce nitrous oxides (NOx). The converters use a three-way catalyst (TWC) consisting of rhodium, palladium, and platinum to turn those smog precursors into water, carbon dioxide, and nitrogen. The three metals are embedded into a porous material such as aluminum oxide (Al2O3) to increase the catalyst surface area. Manufacturers also mix in rare-earth metal oxides to serve as another source of oxygen for the catalytic reactions. This is necessary for times when the exhaust has low oxygen levels, such as when the car is accelerating or when the engine is still cold. Here, we highlight three innovative advances in TWCs from the databases of Chemical Abstracts Service.

Top


New Oxide Tolerates The Heat

In TWCs, rhodium is a critical component in the catalytic reduction of NOx. However, the metal’s activity decreases as the catalyst ages and through chronic exposure to the high temperatures of the exhaust. A research team from N.E. Chemcat found that as rhodium particles age they self-assemble and grow in size, resulting in a significant drop in their activity. The researchers inhibited this mass-transfer process by dispersing neodymium oxide (Nd2O3) particles with a diameter of 50–100 nm around the rhodium particles (US 20150038325 ). The rhodium particles maintained their size during simulated aging experiments, which involved the researchers heating the catalyst to 950 °C and running the engine for 50 hours. They also found that the Nd2O3 enhanced the catalytic activity of rhodium when compared with similar TWCs without neodymium. N.E. Chemcat researchers wouldn’t comment on the mechanism behind the neodymium effect because of the pending patent. But they say the technology could be used for other catalyst systems that break down NOx.

Top


Double Layers For Cold Starts

Bimetallic oxides of cerium and zirconium (CeO2-ZrO2) are widely used as an oxygen storage material in TWCs. As the catalyst ages, or when it is exposed to high temperatures, the surface area of these oxides decreases, which limits their ability to transfer oxygen and impairs catalyst activity. Adding Al2O3 to the CeO2-ZrO2 oxides, either through physically mixing the oxides or chemically forming the trimetallic oxide, can improve the catalyst’s thermal resistance and enhance its oxygen storage and release properties. Researchers from Johnson Matthey developed a new method to coprecipitate cerium(IV) and zirconium(IV) compounds with Al2O3 to form a trimetallic oxide (CeO2-ZrO2-Al2O3). Compared with a physical mixture of Al2O3 and CeO2-ZrO2, the trimetallic oxides were thermally more stable and had better oxygen storage and release properties (JP 2014534156). Haiying Chen, director of Johnson Matthey’s research division, tells C&EN that the material was initially developed to meet future stringent government emissions standards.

Mitch Garcia wrote this month’s Patent Picks in collaboration with CAS. This feature reports on trends CAS scientists observe from patents in CAS databases. Please send comments and suggestions to patentpicks@acs.org.

Advances in engine design to increase fuel efficiency might unintentionally lower exhaust temperatures below the temperature at which TWCs are most efficient. Raoul Klingmann and coworkers at Umicore have developed a double-layered TWC, which is thought to be suitable for cooler working conditions (US 20150125370). The first layer sits directly on the surfaces of the catalytic converter’s honeycomb structures and is composed of CeO2-ZrO2 and palladium mixed with Al2O3. The second layer, which is coated over the first and is in direct contact with the exhaust, consists of rhodium in Al2O3. Although the double-layered TWC is meant to meet the needs of future engines, the researchers say it could help better handle exhaust from existing ones when the engines have just started and are still cold.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.