Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Materials

Demystifying Quasicrystal Growth

Microscopy: Growth-and-repair mechanism yields nonperiodic order

by Jyllian Kemsley
August 31, 2015 | A version of this story appeared in Volume 93, Issue 34

[+]Enlarge
Credit: Phys. Rev. Lett.
TEM analysis of an Al-Ni-Co quasicrystalline alloy shows that the crystal grows along a growth edge (red line) by a tiling mechanism that results in a pattern of ordered pentagons.
Diagram of the quasicrystalline structure of an alloy of aluminum, nickel, and cobalt.
Credit: Phys. Rev. Lett.
TEM analysis of an Al-Ni-Co quasicrystalline alloy shows that the crystal grows along a growth edge (red line) by a tiling mechanism that results in a pattern of ordered pentagons.

Ordered crystalline materials that lack periodicity are called quasicrystals. Such materials, which were first identified in the 1980s, include metal alloys, polymers, and liquid crystals. One fundamental piece of information about quasicrystals—how they grow into their particular structured forms without simply repeating a unit cell—has largely remained a mystery. Transmission electron microscopy studies now provide the first atomic-scale look at the growth of a quasicrystalline alloy of aluminum, nickel, and cobalt, reports a team led by Keiichi Edagawa of the University of Tokyo (Phys. Rev. Lett. 2015, DOI: 10.1103/physrevlett.115.075501). The alloy grows in a so-called Penrose tiling pattern with fivefold rotational symmetry. Edagawa and colleagues found that the growth occurs in part through an error-and-repair mechanism in which clusters of atoms sometimes add initially in an “incorrect” formation, then within one second rearrange into the quasicrystalline pattern. The initial addition adds strain to the quasicrystal, and the strain is relieved through the repair process, the authors say. Other metal alloy quasicrystals may grow similarly, Edagawa says, but polymeric and other materials may have different mechanisms.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.