Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Environment

Fuel composition influences engine emissions of carbon nanotubes

Carbon nanotubes form when a diesel engine burns fuel containing traces of sulfur and ferrocene

by Melissae Fellet, special to C&EN
October 10, 2016 | A version of this story appeared in Volume 94, Issue 40

[+]Enlarge
Credit: Environ. Sci. Technol. Lett.
In these TEM images, carbon nanotubes collected from diesel engine exhaust appear to grow from catalytic iron particles.
Transmission electron micrographs of carbon nanotube growth catalyzed by iron particles.
Credit: Environ. Sci. Technol. Lett.
In these TEM images, carbon nanotubes collected from diesel engine exhaust appear to grow from catalytic iron particles.

Vehicle exhaust includes a variety of particulates from burning fuel, including carbon nanotubes. Nanotubes are worrisome because their long, thin shape resembles much larger micrometer-scale asbestos fibers, which can linger in lung tissue and are known to cause respiratory diseases. A new study has shown that sulfur and ferrocene found in diesel fuel promote the formation of roughly 100-nm-long nanotubes in a car engine (Environ. Sci. Technol. Lett. 2016, DOI: 10.1021/acs.estlett.6b00313). Jacob J. Swanson, a mechanical engineer at Minnesota State University, Mankato, and his colleagues systematically introduced fuel with increasing concentrations of sulfur and ferrocene into a diesel engine in their laboratory. They captured the exhaust and examined the shape of the emitted particulates using transmission electron microscopy. When the fuel had only sulfur or only ferrocene, a few nanotubes appeared. But at the highest concentrations tested when both components were present, 4,500 ppm sulfur and 36 ppm ferrocene, the researchers saw an appreciable increase in the number of nanotubes in the images collected. This sulfur concentration is comparable to levels in diesel fuel in some countries, though higher than in the U.S. and other developed countries, meaning exposure to nanotubes could potentially be greater in places with less stringent fuel standards, the researchers say.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.