ERROR 1
ERROR 1
ERROR 2
ERROR 2
ERROR 2
ERROR 2
ERROR 2
Password and Confirm password must match.
If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)
ERROR 2
ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.
Most of us fight a battle with dust every day. But for art conservators and those in the electronics industry, microscopic dust can be calamitous, diminishing beauty and value, and rendering devices unusable. Particles larger than 10 µm can be blown off using air jets. But known methods to get rid of smaller specks—such as solvents, ultrasonic waves, and lasers—can damage surfaces while cleaning.
T. Kyle Vanderlick and her colleagues at Yale University have come up with a simple, nondestructive tool to eradicate this invisible enemy (ACS Appl. Mater. Interfaces 2016, DOI: 10.1021/acsami.5b09154). They made polydimethylsiloxane (PDMS) sheets covered with an array of microscopic cylindrical pillars 2–50 µm in diameter. They used this material to lift spherical silica particles with diameters of 0.26–7.75 μm from thin poly(methyl methacrylate) (PMMA) films, which serve as a proxy for dust particles on delicate acrylic paint films.
When the researchers gently touch the film with the material, the PDMS interacts minimally with the PMMA, but strong electrostatic forces transfer the silica particles to the pillars’ flat tips. The method should work to remove dust from any rigid surface, says Hadi Izadi, a postdoctoral associate in Vanderlick’s group.
When the material is brought down on another dusty spot, new silica particles push away the ones already stuck on the pillar tips. Those previously attached particles roll up the sides of the pillars, leaving clean PDMS pillar tips to grab new particles. To ensure this self-cleaning, the pillars cannot be more than eight times wider than the particles.
That’s the critical advantage of the micropillar material over a flat PDMS sheet, which also attracts dust, Izadi says. Dust particles have nowhere to go on a flat sheet, so they accumulate and cause tiny dents when pressed repeatedly on the PMMA surface. Flat sheets also do not work on sub-micrometer particles, for reasons the researchers don’t fully understand.
Instead, by repeatedly tapping the micropillar material on the film, the researchers could eliminate all the dust from the surface. The researchers estimate that the micropillar material can clean a surface nine times its size covered in a monolayer of dust.
Join the conversation
Contact the reporter
Submit a Letter to the Editor for publication
Engage with us on X