Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Environment

Pure Hydrogen

Novel copolymer membranes may improve hydrogen purification efficiency

by Michael Freemantle
February 6, 2006 | A version of this story appeared in Volume 84, Issue 6

A family of poly(ethylene oxide) materials exhibits "outstanding" performance in removing acid gas impurities from hydrogen feed streams at high pressure, according to researchers at the University of Texas (UT), Austin, and Research Triangle Institute in Research Triangle Park, N.C., who prepared the materials (Science 2006, 311, 639).

Hydrogen produced industrially from hydrocarbons contains impurities such as carbon dioxide. Conventional materials for hydrogen purification allow H2 molecules to diffuse through them in preference to larger molecules (C&EN, Oct. 3, 2005, page 49). The process lowers the pressure of H2, which then has to be repressurized-at a cost-before use.

The novel materials allow H2 purification to be carried out at high pressures. "Any improvement in purification efficiency could reduce the cost of H2 and accelerate its use in energy applications in the future 'hydrogen economy,' " says UT chemical engineering professor Benny D. Freeman.

The polymers are "reverse selective" because acid gases rather than H2 permeate through them. The cross-linked polymers exhibit increasing selectivity for acid gases with increasing acid gas partial pressure, Freeman points out.

The increasing selectivity is remarkable because polymer membranes swell in acid gases, observes Neil B. McKeown, a chemistry professor at Cardiff University, in Wales. "Swelling generally results in lower selectivities at higher pressures because all the gases diffuse faster through the extra space," he explains. "The advantage of the 'reverse-selective' type of membrane is that it can operate at pressures that are compatible with the conditions used in H2 production via hydrocarbon reforming."

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.