Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

Materials

Nanostructures Sop Up Radioactive Ions

Tiny titanate tubes and fibers could remediate contaminated water

by Bethany Halford
October 3, 2011 | A version of this story appeared in Volume 89, Issue 40

Titanate nanotubes and nanofibers could offer an inexpensive means for removing radioactive cesium and iodide ions from contaminated water (Angew. Chem. Int. Ed., DOI: 10.1002/anie.201103286). These ions are the products of uranium fission, and they can easily dissolve in reactor water during an accident at a nuclear facility. A team led by Huaiyong Zhu of Australia’s Queensland University of Technology reports that titanate nanotubes and nanofibers made inexpensively from titanium dioxide can chemisorb 137Cs+ and 131I and trap them for safe disposal. In the case of 137Cs+, titanate nanotubes proved to be the most effective, soaking up 80% of the ions in a 250 ppm solution and extracting all the ions when the concentration was below 80 ppm. To use the titanate nanostructures to remove 131I from aqueous solutions, the researchers had to anchor silver oxide nanoparticles to the surface of the tubes and fibers. It’s these particles that soak up the iodide ions while the titanate plays a supporting role. The researchers hope the knowledge they’ve gleaned will lead to adsorbents for removing other toxic ions found in groundwater or wastewater.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.