ADVERTISEMENT
2 /3 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

3-D Printing

Spore-containing materials stand up to harsh treatment

Researchers adapt 3-D printer to make objects with embedded bacterial spores

by Celia Henry Arnaud
December 13, 2019 | APPEARED IN VOLUME 97, ISSUE 48

09748-scicon11-spore.jpg
Credit: Nat. Chem. Biol.
Spore-containing 3-D-printed rods can be dried for storage (left) and rehydrated (right) for use. Each rod is 25 mm long.

Living materials—ones made from a scaffold embedded with live cells—can be used for applications such as sensing, chemical or material production, and bioelectronics. A challenge with such materials is keeping the cells alive over extended periods and under harsh conditions. Christopher A. Voigt, Lina M. González, and Nikita Mukhitov of the Massachusetts Institute of Technology have adapted a 3-D printer to make objects with embedded bacterial spores (Nat. Chem. Biol. 2019, DOI: 10.1038/s41589-019-0412-5). Instead of mixing the bioink ahead of time, the researchers combined separate streams of agarose and Bacillus subtilis spores in the printhead, which they maintained at 75 °C, a temperature high enough for the agarose to flow easily but not so high that the spores die. The spores survived even when the printed material was exposed to harsh conditions, including dehydration, ultraviolet light, X-rays, and short doses of γ-radiation. Genetically engineered bacterial spores were able to sense and respond to their environment, as well as to produce antibacterial compounds to kill Staphylococcus aureus. Spore-containing materials that were printed and dried were still active upon rehydration 1 month later, which suggests that these materials could be stored over extended periods.

X

Article:

This article has been sent to the following recipient:

Leave A Comment

*Required to comment