Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN
 

_____ Brought to you by Thermo Fisher Scientific _____

How to Boost Laboratory Productivity with a Consolidated GC-MS Approach for Soil Testing

REGISTER NOW

 

  September 26, 2019

  8:00 a.m. PDT, 11:00 a.m. EDT, 16:00 BST, 17:00 CEST

 

Overview

 

Polychlorinated biphenyls (PCBs) and polyaromatic hydrocarbons (PAHs) are toxic organic compounds that can contaminate soils, air, sediments and water as a result of natural and anthropogenic processes. PCBs and PAHs are resistant to environmental degradation and can be transported over long distances. Moreover, due to their lipophilicity these chemicals can undergo biomagnification and accumulation in the food chain and can cause a significant risk to human and wildlife populations. Their toxicity at very low concentrations means that countries and corporations are legally obliged to monitor for their presence in the environment so that the risk of uptake of these compounds into to the food chain and subsequently into human populations is minimized. PCBs and PAHs are usually analyzed by gas chromatography (GC) coupled to mass spectrometry (MS).

The major challenges for the analysis of PAHs and PCBs are the requirement for tedious time-consuming manual sample preparation, long chromatographic separations and ultimately low sample throughput and high cost of analysis. In order to better characterise an environmental sample, quite often multiple methods are employed for both the sample preparation and GC-MS analysis of these compounds. This requires multiple analysis of the same sample which increases both the requirement for labor, instrumentation and ultimately this increases the cost per sample. In this webinar we discuss a consolidated method for the automated, rapid and cost-effective analysis of PAHs and PCBs in solid environmental samples. Several extraction techniques were assessed including QuEChERs and an automated solvent extraction and clean up. All analyses were performed using the Thermo Scientific™ ISQ™ 7000 GC-MS system. Moreover, by means of only one software the analyst can control and automate sample preparation, data acquisition, processing and reporting with the aid of the Thermo Scientific™ Chromeleon™ Chromatography Data System (CDS).

Brought to you by:

 

Key Learning Objectives

  • How to increase laboratory productivity by speeding up the analysis time and by consolidating the methods for PAHs and PCBs determination in solid environmental samples
  • Sample preparation options to automate and reduce time and cost versus manual labor
  • The use of a single software platform for the entire process to simplify the workflow

Who Should Attend

  • Researchers/ R&D Mangagers
  • Laboratory Managers/ Directors / Supervisors
  • Laboratory Technicians / Operators
  • Routine contract testing environmental labs
  • Labs conducting environmental testing
  • Labs analyzing PAHs and PCBs
 

Speaker

Aaron Lamb
Senior Marketing applications specialist,
Thermo Fisher Scientific
 

Moderator

Stu Borman,
Contributing Senior Editor,
C&EN Media Group
 

REGISTER NOW