ERROR 1
ERROR 1
ERROR 2
ERROR 2
ERROR 2
ERROR 2
ERROR 2
Password and Confirm password must match.
If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)
ERROR 2
ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.
Putting some fizz into a family vacation
Dropping a bunch of Mentos candies into a bottle of Diet Coke is a favorite science demonstration, as the action results in an impressive geyser of foam to rival Old Faithful. Thomas S. Kuntzleman, a chemistry professor at Spring Arbor University, says he first saw this demo in elementary school and “that was it—I was hooked.” Now, he has taken the famous Diet Coke fountain demo to new heights by measuring the amount of foam produced at different altitudes (J. Chem. Educ. 2020, DOI: 10.1021/acs.jchemed.9b01177).
The rough surface of Mentos candies provides nucleation sites for bubbles to form and grow from the carbon dioxide dissolved in the Diet Coke. Kuntzleman hypothesized that atmospheric pressure should affect the frequency of bubble formation and was inspired to put this to the test.
He recruited a friend, chemistry teacher Ryan Johnson, to measure the foam produced during a climb up Pikes Peak in Colorado (4,300 m elevation). Kuntzleman also did the experiment himself during a summer vacation as he and his family drove through a range of altitudes, from Death Valley, California (13 m below sea level), to a snowy spot near Tioga Pass in Yosemite National Park (3,260 m elevation). He used 500 mL bottles of Diet Coke, making sure they all came from the same manufacturing lot because carbon dioxide leaks out over time. He also made sure the bottles were at a consistent 27 °C using the heat and air-conditioning from the car.
To his delight, he saw that the amount of foam did increase at the high altitudes, and he was able to model the bubble nucleation. “I’m tickled that we figured out how to do that,” he says.
Brewing up a water filter
Some people partial to carbonated beverages enjoy imbibing kombucha, a fizzy, fermented drink made from tea, sugar, and a mushroom-like “mother” known as a SCOBY—symbiotic culture of bacteria and yeast. Katherine R. Zodrow, an assistant professor and head of the Environmental Engineering Department at Montana Technological University, saw a micrograph of the network of thin cellulose fibers in a SCOBY and thought that it looked a lot like a membrane. “I’ve wanted to make membranes that are alive for a long time, and this was the perfect place to start,” she says.
So Zodrow and her colleagues grew kombucha SCOBYs about 1–1.5 mm thick and tested their ability to filter particles from water. They found that the living membranes could remove more than 98% of 50 nm particles and 99% of 100 nm particles, suggesting that a SCOBY filter could remove most bacteria and protozoa. What’s more, the membranes heal themselves when punctured (Environ. Sci. Technol. Lett. 2020, DOI: 10.1021/acs.estlett.0c00019). With more optimization, perhaps SCOBYs will one day serve a dual purpose—filtering water as well as making a bubbly drink.
Corinna Wu wrote this week’s column. Please send comments and suggestions to newscripts@acs.org.
Join the conversation
Contact the reporter
Submit a Letter to the Editor for publication
Engage with us on X