Issue Date: November 2, 2015 | Web Date: October 29, 2015
Best Effort Yet To Make Direct Methane Fuel Cell A Reality
A new device uses a platinum catalyst to break down methane to produce electricity at low temperatures, generating more power than any previous direct methane fuel cell.
Currently, methane, a primary constituent of natural gas, is burned to produce heat and other forms of energy for homes and businesses. Direct methane fuel cells—in which methane is used directly, without first being converted into hydrogen—could produce energy more efficiently than combustion-based methods.
But such fuel cells must break methane’s strong C–H bonds, and that generally requires high operating temperatures between 650 and 1,100 °C, which add significantly to a device’s operating costs. Researchers developed a low-temperature direct methane fuel cell in 1962, and Andrew M. Herring of Colorado School of Mines and coworkers revived the concept in 2012. But both designs generated negligible amounts of power.
Now Herring and Brian G. Trewyn at Colorado School of Mines, T. Brent Gunnoe of the University of Virginia, and coworkers have used an organometallic complex to activate methane C–H bonds in a low-temperature direct methane fuel cell (J. Am. Chem. Soc. 2015, DOI: 10.1021/jacs.5b06392).
The team covalently attached a low-temperature methane-activating platinum catalyst to conductive carbon and used the material as a fuel-cell anode. The material catalyzes an oxidation process that releases carbon dioxide, electrons, and protons. The protons then react with oxygen at the cathode to produce water.
The process converts methane directly to electricity at 80 °C and generates five times the power of any previous low-temperature direct methane fuel cell. But it has limitations: The catalyst deactivates over time, diffusion of methane into the anode is limited, and maximum power density is still too low for real-world use.
The approach demonstrates feasibility, “and there is ample room for improvement,” comments catalysis specialist Matteo Cargnello of Stanford University. “It is an elegant and novel concept that might open new perspectives in the efficient and clean use of natural gas,” adds materials scientist Paolo Fornasiero of the University of Trieste, Italy.
- Chemical & Engineering News
- ISSN 0009-2347
- Copyright © American Chemical Society