Lowering the temperature on nitrogen splitting | Chemical & Engineering News
Latest News
Web Date: January 3, 2018

Lowering the temperature on nitrogen splitting

Computer simulations predict a new light-activated catalyst could make the Haber-Bosch process obsolete
Department: Science & Technology
News Channels: Materials SCENE
Keywords: Computational chemistry, nitrogen, Haber-Bosch, photocatalyst
[+]Enlarge
A predicted molybdenum-gold catalyst splits a dinitrogen molecule.
Credit: Adapted from Sci. Adv.
A nitrogen molecule coordinated to a gold-molybdenum catalyst.
 
A predicted molybdenum-gold catalyst splits a dinitrogen molecule.
Credit: Adapted from Sci. Adv.

The world relies on the Haber-Bosch process to reduce atmospheric nitrogen to ammonia to make fertilizer, pharmaceuticals, and other industrially important chemicals. But the process consumes a tremendous amount of energy—about 1% of the world’s electricity every year. A new light-driven catalyst could dramatically reduce the temperature needed to drive the reaction, according to computer simulations (Sci. Adv. 2017, DOI: 10.1126/sciadv.aao4710).

Dinitrogen molecules contain one of the strongest known chemical bonds. To break those bonds, the Haber-Bosch process must run at temperatures above 400 °C.

John Mark P. Martirez and Emily A. Carter at Princeton University propose a gold-molybdenum catalyst that could split the nitrogen triple bond at room temperature using energy from visible light. That dissocation step is the primary limit on the reaction rate in the Haber-Bosch process.

Their proposed catalyst relies on a phenomenon called surface plasmon resonance, in which the valence electrons on a nanoparticle oscillate in unison when excited by a photon. Harnessed correctly, that excitation energy could push the nitrogen dissocation reaction over its high activation energy barrier, Carter says. She and Martirez proposed using gold nanoparticles, which absorb visible light to produce surface plasmon resonances, and then doping the surface with molybdenum, which can grab onto and split nitrogen molecules.

The researchers evaluated the catalyst’s potential using a computer simulation technique that Carter developed, called embedded correlated wave function theory. They used it to predict the course of the dissociation reaction for nitrogen in different excited states that are accessible at gold nanoparticle plasmon frequencies.

The calculations suggest that the catalyst can lower the energy needed to split nitrogen by about 80 to 90%.

“It should be possible at room temperature and with visible light to break the nitrogen bond,” Carter says. She noted that the catalyst may also allow for another source of energy savings: lower operating pressures during the reaction.

The researchers next need to demonstrate that their nitrogen-reducing catalyst can work as predicted.

“This is the very type of theoretical predictions the N2 photoreduction field needs to challenge the experimentalists,” says Mercouri Kanatzidis of Northwestern University, who has researched nitrogen-splitting photocatalysts in the past.

Carter collaborated with Naomi Halas and Peter Nordlander of Rice University on an earlier hydrogen-splitting catalyst, and says she may work with those two again to test this predicted nitrogen reducer.

The nitrogen-splitting catalyst may still be unproven in the lab, but Carter is already thinking about more ways to use surface plasmonic resonance. She says she’s collaborating with Halas and Nordlander on another classically difficult reaction: activating the carbon-hydrogen bond in methane.

 
Chemical & Engineering News
ISSN 0009-2347
Copyright © American Chemical Society
Comments
Christian Buchwalder (Wed Jan 03 17:49:21 EST 2018)
Very exciting and promising!
Best of luck tackling the synthetic and experimental side!
Stanton de RIel (Wed Jan 03 20:50:33 EST 2018)
Surface plasmonic resonance -- maybe the proposed catalyst could be considered the gold+ standard?
rgarner (Thu Jan 04 00:17:26 EST 2018)
Hopefully, will work out. Saving energy is always good.
SUBHA (Thu Jan 04 06:19:57 EST 2018)
What is surface plasmonic resonance?
Thomas Bark (Thu Jan 04 15:59:38 EST 2018)
The formation of NH3 is markedly exothermic. Albeit requiring high temperature and pressure to achieve satisfactory reaction speed, the reaction itself does not consume energy. The reaction heat is actually recovered and used to heat fresh reactants. However, the rxn consumes highly energetic hydrogen! This is the real reason for the high energy demand and this issue will not vanish with the introduction of a new catalyst. Certainly, NH3 synthesis at RT would be remarkebly [understatement], but only if a new, abundant, environmentally friendly reducing agent comes with the package, we will see "green" ammonia.

Leave A Comment

*Required to comment