If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.



Safety Alert: Explosion During Prep Of (C6F5)PH2

May 21, 2012 | A version of this story appeared in Volume 90, Issue 21

While a researcher fractionally distilled the primary phosphine (C6F5)PH2, which was synthesized by the reduction of (C6F5)PCl2 with an excess of lithium aluminum hydride (LAH), the distillation apparatus containing the phosphine detonated. Fortunately, because the researcher was wearing appropriate personal protective equipment and working in front of a sliding blast shield, only minor injuries resulted from the explosion.

The researcher was following a literature prep for the synthesis of (C6F5)PH2 (Z. Naturforschg.1966, 21b, 920), wherein (C6F5)PCl2 was reduced with an excess (2.1 M equiv based on Li) of LAH. After the reaction was completed, the slurry was filtered and ether was evaporated from the filtrate, yielding an oil and some LAH. This mixture was then extracted into hexanes to remove the remaining LAH, and the resulting phosphine/hexanes mixture was fractionally distilled under N2. After the hexanes were fractionally distilled away and the distillation apparatus was at approximately 50 °C, the apparatus detonated.

The source of the incident is being investigated. Work with this molecule and similar compounds should be conducted carefully until the exact cause of this incident is determined and reported.

By Ian Tonks
Clark Landis
Department of Chemistry
University of Wisconsin, Madison


This article has been sent to the following recipient:

Chemistry matters. Join us to get the news you need.