ERROR 1
ERROR 1
ERROR 2
ERROR 2
ERROR 2
ERROR 2
ERROR 2
Password and Confirm password must match.
If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)
ERROR 2
ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.
To create flexible electronics, researchers often have to make compromises. Boosting a device’s elasticity can mean incorporating materials that sap its conductivity. Nanostructured electronics can provide both flexibility and conductivity, but they tend to be difficult to fabricate and can be incompatible with certain soft substrates, such as textiles. A team of researchers led by Takao Someya of the University of Tokyo has now developed an ink that can be used to print highly conductive and elastic structures such as transistor arrays directly on a variety of materials (Nat. Commun. 2015, DOI: 10.1038/ncomms8461). Key to the ink’s versatility is a well-balanced chemical composition, which includes silver flakes, a fluorinated elastomer, a fluorinated surfactant, and an organic solvent. As the Tokyo team prints the mixture, water and the surfactant begin to separate from the organic solvent, forcing silver flakes to congregate into a conductive network at the ink’s surface. The surfactant also improves the silver’s affinity for the fluorinated polymer, allowing the ink to stay stretchy as it cures.
Join the conversation
Contact the reporter
Submit a Letter to the Editor for publication
Engage with us on X