Advertisement

If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.

ENJOY UNLIMITED ACCES TO C&EN

3-D Printing

Spiky surfaces steer different fluids in opposite directions

Simple, pump-free transport of liquids could be used in microfluidics, electronics cooling, and mixture separations

by Prachi Patel, special to C&EN
September 24, 2021 | A version of this story appeared in Volume 99, Issue 35

 

Panels showing red-colored ethanol and blue-colored water moving in opposite directions along the leaves of the Araucaria plant.
Credit: Science
The angled leaves of the Araucaria plant direct water and ethanol in opposite directions.

A new surface carved with neatly arranged rows of angled teeth steers different liquids in different directions without the need for pumps (Science 2021, DOI: 10.1126/science.abg7552). The 3D surface can propel liquids at high speed. This simple way to maneuver liquids without using energy could be important for microfluidic lab-on-a-chip systems and for wicking heat-transfer liquids inside the miniature pipes used to cool electronics. To transport fluids without pumping, researchers typically rely on surfaces with slowly changing curvature or varying abilities to repel liquids. But with such designs, all liquids move in the same direction, says Zuankai Wang, a mechanical engineer at the City University of Hong Kong. He and his colleagues wanted to make a system that directs liquids in different directions according to their intrinsic properties and not those of the surface. Their inspiration was the Araucaria plant, which sports periodically arranged pointed, curved leaves. Liquids with different surface tensions move in opposite directions along these leaves. The team used 3D printing to make rows of ratchet-like arrays on a polymer surface. Liquids with high surface tension, like water, moved against the tilting direction of the teeth, while low-surface-tension fluids, like ethanol, moved in the opposite direction. The researchers also demonstrated that this selective liquid steering can be used to separate water-oil mixtures. When they put a 1:1 water-oil mixture on the surface, the fluids moved in opposite directions, separating completely in seconds.

Article:

This article has been sent to the following recipient:

0 /1 FREE ARTICLES LEFT THIS MONTH Remaining
Chemistry matters. Join us to get the news you need.