ERROR 1
ERROR 1
ERROR 2
ERROR 2
ERROR 2
ERROR 2
ERROR 2
Password and Confirm password must match.
If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)
ERROR 2
ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.
An ultrafast method can drastically reduce the time needed to synthesize ceramics, cutting prep time from several hours to less than a minute (Science 2020, DOI: 10.1126/science.aaz7681). The high-temperature technique, which works with many classes of ceramics, can be used for manufacturing and for high-throughput evaluation of novel materials.
Ceramics have long played key roles in electronics, energy storage, and extreme temperature applications because of the materials’ thermal, mechanical, and chemical stability. Chemists often make ceramics by combining powdered precursors and heating the mixture for hours in a furnace. The heat drives solid-state reactions that fuse the particles into a solid product through a process known as sintering.
This prolonged exposure to high temperatures not only means ceramics production is slow, it also can cause volatile elements to diffuse and escape from the reaction mixture. That unwanted process is hard to control and may adversely affect product properties. For example, some garnet-type ceramics are being studied for use as solid-state electrolytes, which are fire-resistant alternatives to the flammable liquid electrolytes used in lithium-ion batteries. But it’s difficult to make them reliably. These materials can lose lithium during sintering, which can reduce their ionic conductivity and impair battery performance.
To shave time off the lengthy ceramics production procedure, researchers have devised various rapid-processing methods, such as flash sintering and microwave-assisted and spark-plasma sintering. But those methods can be expensive or limited in terms of the temperatures they can reach or the types of ceramics to which they can be applied.
Aiming to bypass those limitations, a large team of researchers including the University of Maryland’s Chengwei Wang, Liangbing Hu, and Yifei Mo came up with a simple way to make numerous types of ceramics in seconds. The team presses pellets of mixed precursor powders, then inserts the pellets between carbon strips that are heated electrically in an inert atmosphere, reaching up to 3,000 °C in less than 30 s. Holding the starting material at high temperature for about 10 s drives reactive sintering.
The team used the pellet-heating method to make many types of ceramics, including a set of Li-ion-conducting lanthanum-zirconium-tantalum garnet-type electrolytes with various amounts of lithium. Mass spectrometry shows that lithium loss in samples made via the ultrafast method did not exceed 4% because the light element had little time to diffuse. In contrast, that number reached 99% in some control samples made over several hours in a conventional furnace.
The team also demonstrated that the new method isn’t limited to processing flat pellets. They used it to prepare centimeter-sized ceramic objects of various complex shapes by rapidly heating polymer-based precursor structures that were built via 3-D printing. One of the structures, a piezoresistance magnetic field sensor, contains aluminum–doped layers for piezoresistivity and separate cobalt-doped regions for magnetic response. Analyses show that the sensor works well because the metal dopants remained in place during fast processing. By contrast, high levels of diffusion caused the control device to work poorly.
“Being able to sinter a material in 10 seconds is a game changer,” says Gerbrand Ceder of the University of California, Berkeley. Ceder, a pioneer in combining computational and experimental methods to discover new battery materials, expects that the study will have an impact in the area of solid-state batteries, making manufacturing with high-throughput more likely. The advance may also enable speedy evaluation of predicted novel materials, he says.
“Today, in materials design, we are often limited by the slow speed by which predictions can be experimentally validated or negated. Rapid synthesis methods, like the one described here, may change that.”
This story was updated on May 7, 2020, to clarify what dopants were used in the the magnetic field sensor. The intended meaning of "co-doped" was "cobalt-doped."
Join the conversation
Contact the reporter
Submit a Letter to the Editor for publication
Engage with us on X