If you have an ACS member number, please enter it here so we can link this account to your membership. (optional)

ACS values your privacy. By submitting your information, you are gaining access to C&EN and subscribing to our weekly newsletter. We use the information you provide to make your reading experience better, and we will never sell your data to third party members.



Kevlar, the tough material used in body armor and sporting gear, now comes in aerogel form

Simple spinning method for making low-density fibers may lead to high-performance thermal insulation

by Mitch Jacoby
May 11, 2019 | A version of this story appeared in Volume 97, Issue 19


These photos show spools of colored thread and a woven textile.
Credit: ACS Nano
Kevlar aerogel fibers can be dyed and woven into textiles.

Aerogels are lightweight, wispy materials whose volume is taken up almost entirely by air. These fluffy substances can be made from cellulose, silica, and other materials and used for thermal insulation, catalyst supports, and filters. But aerogels tend to be mechanically weak. So Xuetong Zhang and coworkers at the Chinese Academy of Sciences, Suzhou, devised a simple method for making aerogel fibers from a notoriously tough starting material—the aramid-based product known as Kevlar (ACS Nano 2019, DOI: 10.1021/acsnano.9b01094). The team, which also included Zengwei Liu, Jing Lyu, and Dan Fang, first prepared a suspension of Kevlar nanofibers by stirring a few grams of the bulk material in dimethyl sulfoxide. Then, they created gel fibers by extruding the suspension via a pump-controlled syringe into a coagulation bath. Finally, they treated the product with alcohol and freeze-dried it, removing the solvent. As the material froze, it expanded to form a spongelike matrix, turning the Kevlar fibers into aerogels. The team then wove these into aerogel textiles. Compared with various organic and inorganic aerogels, the Kevlar aerogel exhibits similar surface area and thermal conductivity but has greater mechanical strength. It also shows good thermal and flame resistance and can be dyed and rendered hydrophobic.


This article has been sent to the following recipient:

Chemistry matters. Join us to get the news you need.